Rifle Rails

Sort by:

View

Showing 1 - 24 of 83 products
Showing 1 - 24 of 83 products

Made for the Anschutz 1451 this rail allows for a firm lock onto your rail's dovetail. Six grub screws pull the rail up, locking it tightly into place.

Made for the Anschutz Match 64 action, this will work with the 1416/1417/1516/1517 with ejection port. This rail allows for rear and forward reach.

Made for the Benelli Lupo straightpull with the screws provided this rail locks tightly onto your rifle's action.

The Bergara B14, fast becoming one of the most popular rifles on the UK market. Our rails allow you to sturdily mount your scope with either 0 or 20 MOA rail. This rail will fit the long action rifles, such as 6.5x55, .270 Win and 30-06.

The Bergara B14 Rimfire, fast becoming one of the most popular rifles on the UK market. Our rails allow you to sturdily mount your scope with either 0 or 20 MOA. 

The Bergara B14, fast becoming one of the most popular rifles on the UK market. Our rails allow you to sturdily mount your scope with either 0 or 20 MOA.

Made for the new rimfire Bergara BMR. Differing from the standard Bergara B14.

Made in true mil spec picatinny, screwing into the receiver with the screws provided.

Made for the Bergara Pro/Premier Long Action rifles. Our rails allow you to sturdily mount your scope with either 0 or 20 MOA.

Made in true mil spec picatinny, screwing into the receiver with the 8-40 screws provided.

Made for the Bergara Pro/Premier Short Action rifles. Our rails allow you to sturdily mount your scope with either 0 or 20 MOA.

Made in true mil spec picatinny, screwing into the receiver with the 8-40 screws provided.

Made for the Browning T-Bolt Straight pull rimfire rifle, fitting securely down the dovetail and grub screwing into place for a central fit.

Made for the Browning T-Bolt Straight pull rimfire rifle, fitting securely down the dovetail and grub screwing into place for a central fit. Un-anodised finish to match stainless steel rifles.

Made for Browning X-Bolt, please note that this rail is action size specific. You will need the correct rail as per the table below. Fitted using the eight screws provided into the top of the action, using no more than 1.5 Nm / 14 in-lbs.​​​​​​ of torque.

Made for Browning X-Bolt, please note that this rail is action size specific. You will need the correct rail as per the table below. Fitted using the eight screws provided into the top of the action, using no more than 1.5 Nm / 14 in-lbs.​​​​​​ of torque.

Made for Browning X-Bolt, please note that this rail is action size specific. You will need the correct rail as per the table below. Fitted using the eight screws provided into the top of the action, using no more than 1.5 Nm / 14 in-lbs.​​​​​​ of torque.

The Christensen Arms Long Action, founded in 1995 in Utah. Our rails allow you to sturdily mount your scope with either 0 or 20 MOA.

Made in true mil spec picatinny, this rail allows for a firm lock onto your rifle's action. Supplied with screws.

The Christensen Arms Long Action, founded in 1995 in Utah. Our rails allow you to sturdily mount your scope with either 0 or 20 MOA.

Made in true mil spec picatinny, with the screws provided this rail locks tightly onto your rifle's action.

Supplied with Vibra-Tite, anti vibration threadlock

Made for the CZ527 fully reversible and fitted with side clamps. This rail will give you a cantilever reach for better eye relief.

Made in true mil spec picatinny, this rail allows for a firm lock onto your rail's dovetail. Six grub screws pull the rail up, locking it tightly into place. Designed for forward use with night vision.

While this will fit the major of CZ452 Rifles please double check that the dovetail on your rifle is 3/8th. Please consult the sizing chart for further information.

Made for the CZ452 (Please be aware that some CZ452 will have an 11mm dovetail and need a rail made for the CZ455). Fitting on the dovetail of your rifle, sliding over and then locking down with the grub screws (Provided) for a secure fit.

Designed for forward use with night vision on your CZ455 (And some CZ452s - please see chart for details).

Slides up your dovetail, grub screwing down to lift the rail up for a central.

Designed for the CZ455 & CZ457.

Made in true mil spec picatinny, this rail allows for a firm lock onto your rail's dovetail. Eight grub screws pull the rail up, locking it tightly into place.

Extending backwards from the breach this allows for eye relief on a number of night vision optics.

Made in true mil spec picatinny, this rail allows for a firm lock onto your rail's dovetail. Six grub screws pull the rail up, locking it tightly into place.

While this will fit the major of CZ455 Rifles please double check that the dovetail on your rifle is 11mm. Please consult the sizing chart for further information

With a full length of picatinny, raised up to allow for a smooth ejection but uninterrupted with a cut out for an ejection port.

Made for the CZ455 (And some CZ452s, check the chart for further information). Fitting on the dovetail of your rifle, sliding over and then locking down with the grub screws (Provided) for a secure fit.

Made for the CZ455 (And some CZ452s, check the chart for further information). Fitting on the dovetail of your rifle, sliding over and then locking down with the grub screws (Provided) for a secure fit.