Bore Tech’s Benchmark Phosphor Bronze Bore Brushes

It’s not just a brush it’s a Bore Tech Benchmark Brush! Bore Tech’s Benchmark Phosphor Bronze Bore Brushes are known for being the finest in the industry and set the benchmark for all other phosphor bronze brushes. With twice the amount of oversized bristles, double wound cores with looped ends and barrel safe studs these brushes provide long-lasting, safe and effective scrubbing action.
Stock Status: In Stock
Brand: Bore Tech
£0.00

Description

Bore Tech’s Benchmark Phosphor Bronze Bore Brushes are known as being the finest in the industry and set the standard for all other phosphor bronze brushes. This is due to the superior construction and engineered features incorporated into each and every brush.

Our premium Benchmark Bronze Brushes have twice the amount of phosphorous bronze bristles and each caliber has specifically tailored bristle diameters resulting in double the scrubbing action and faster cleaning.

Each 100% barrel safe, double wound bore brush core has a looped end eliminating the sharp cut ends found on many other low quality brushes. This attention to detail along with aircraft grade aluminum studs are all necessary to produce an effective, long lasting, high quality phosphor bronze bore brush for your rifle.

The .17 and .20 caliber rifle brushes are shortened 1 inch in length to lessen the necessary force required to push a brush through the bore. This helps diminish cleaning rod flex that can result in cleaning rod and barrel damage.

Bore Tech’s Benchmark Phosphor Bronze Rifle Bore Brushes are available in Single Packs and Three Packs ranging from .17 to .50 caliber.

We bet you never knew this much effort went into designing a quality brush!

 

Benchmark Phosphor Bronze Bore Brushes Use Instructions

1. Screw brush onto Rod

2. Wet brush with cleaning solvent

3. Make 6-12 passes down length of barrel
NOTE: For bronze brushes you must push the brush down the complete length of the barrel, and exit the muzzle PRIOR to reversing and pulling the brush back

4. Reapply cleaning solvent and continue to brush as necessary

5. When finished, clean brushes before storage.